TEUFELBERGER treeMOTION Gebrauchsanleitung Seite 9

2.4. HOW TO PUT ON treeMOTION
Check that the waist belt and leg loop buckles are
undone (1, 9)
pic. 2
a) Hold the harness by
the back support
pic. 4
c) Securely close the
waist belt buckle (1)
2.5. ... AND OBTAIN A GOOD FIT
1) Adjust waist belt webbing (1) and stow the end under
the elastic loop.
2) Adjust webbing in each leg loop (17) and stow the
end under the elastic loops.
3) Adjust webbing in the adjustable links (5) and stow
the end under the elastic loops
4) Adjust the length of the rope bridge (10) ensuring
the stopper knots are properly tied, dressed and set
before going 'on rope'
pic. 3
b) Step inside the rope
bridge (10) and the leg
loops (17)
pic. 5
d) Securely close the leg
loop buckles (9)
I II III
III
II
pic. 6
IV
pic. 7
The climber shall fully equip the harness for the
task to be performed, then hang in suspension and
adopt a range of work positions to ensure that the
harness is properly fitted, comfortable and suitable
for the task. Leg and back paddings are attached
to the harness by hook-and-loop fastener and can
be removed for cleaning and put back in place.
2.6. ADJUSTMENT OF BUCKLES
Use
I
III
II
pic. 8
9