Technical Data - Auerswald COMfortel WS-650 IP Inbetriebnahmeanleitung

If required, Repeater COMfortel WS-R2/WS-R4 to
i
increase range
The COMfortel WS-650 IP manages all the DECT system's com-
ponents and the IP interface to the PBX.
To run the COMfortel WS-650 IP, you need a SIP-capable PBX,
e.g.:
COMpact 5000/R
i
COMpact 5020 VoIP
i
COMmander 6000/R/RX
i
The COMfortel WS-650 IP is designed to be used in closed, dry
rooms.
To configure the wireless system via the Configuration Manager
you must use a PC which is running in the same network (sub-
net).
Important: Some of the functions require activation in the
Upgrade-Center or a hardware upgrade.
Note: You can obtain accessory components and service com-
ponents either from specialist dealers or from distriCOM's Inter-
net shop (see www.districom.de). Delivery is provided only in
Germany and for specialised dealers also to Austria.

Technical Data

Operating volt-
age
Power con-
sumption
Operating tem-
perature
Storage temper-
ature
System connec-
tion
COMfortel WS-650 IP - Setup and Quick Guide V03 07/2016
110-240 V AC, 50/60 Hz
Min. 2,8 W, max. 6,5 W
10 to 40 °C
-50 to +70 °C
Ethernet 10/100 Base-T (10/100MBit/s, RJ-45
twisted pair)
Important Information
19