Hdmi (Arc) Connection; Bluetooth; Interruption Of The Connection - Silvercrest SSB 40 A1 Bedienungsanleitung

Adjusting the tone quality
The tone quality can only be changed in the mode "Music".
The settings are not stored when you change into a differ-
ent mode
• Press one of the buttons 19 to select the presets for the
tone quality for music (MUSIC), films (MOVIE) or dia-
logue (DIALOG).
• Only in the mode "Music": use the TREBLE –/+
buttons 26 to adjust the treble sounds.
If MOVIE or DIALOG is activated, an automatic
change to MUSIC takes place.
• Only in the mode "Music": use the BASS –/+ 22
buttons to adjust the bass sounds.
If MOVIE or DIALOG is activated, an automatic
change to MUSIC takes place.

6.3 HDMI (ARC) connection

Definition
- HDMI stands for High Definition Multimedia Interface.
Via this transmission route, digital images and audio
signals can be transmitted.
- HDMI (ARC - Audio Return Channel) means that the
cable is provided with an ARC channel. Via this chan-
nel, audio signals are transmitted in both directions.
The following modern devices are usually provided with an
ARC output: television sets, games consoles or digital re-
ceivers. In the following, the connection to a television set
is described.
Via the ARC channel of the HDMI cable, digital audio sig-
nals can be transmitted from the source device (e.g. televi-
sion set) to the soundbar.
The audio transmission via the HDMI (ARC) socket 8 can
only work if all components are ARC-enabled. If the trans-
mission is unsuccessful, you must take one or possibly sev-
eral of the following items into account:
• The old HDMI cable must be replaced with a new
ARC-enabled cable.
• Not every HDMI socket on the television set needs to
support ARC. In this case, the HDMI cable on the tele-
vision set must be connected to another ARC-enabled
HDMI socket. Usually, the respective HDMI sockets are
labelled with ARC. If not, refer to the user instructions
of your television set.
• For several television sets, the digital audio output must
be activated. Select the audio output PCM 2.0 (PCM
stereo).
1. Connect the socket HDMI (ARC) 8 by means of an
ARC-enabled HDMI cable to an HDMI ARC socket of
your television set.
2. Switch on the soundbar with the POWER
ton 28.
3. By pressing the HDMI (ARC) button 17, select the
HDMI input.
4. Switch on the television set. When the connection is es-
tablished for the first time, it may take several seconds
until sound is output from the soundbar.

6.4 Bluetooth

Establishing connection
NOTES:
• The identification of the device is "SSB 40 A1".
• After it has been switched over to Bluetooth
vice automatically attempts to establish a connection
with the last paired device.
• Please observe that the establishment process of the
connection may vary slightly depending on the device
and the software used.
1. Press the button 15 to switch over to a Bluetooth
connection. LED 1 flashes blue.
2. Switch on the audio device (e.g. smartphone) and start
®
the Bluetooth connection.
3. The audio device will now receive the device identifi-
cation "SSB 40 A1". If nothing happens, press the but-
ton PAIR 5 on the device or the
remote control for approximately 1 second. The blue
LED 1 flashes rapidly.
4. Establish the connection with the soundbar on the au-
dio device. If you are asked for a password, enter
"0000". Both devices are now interconnected. LED 1
now lights up in blue and a beep is heard.
NOTE: usually, audio devices remember the identification
of the device. In this case, it may not be necessary to es-
tablish the connection manually again if the Bluetooth
function is activated.
5. Now play a song on the audio device. The sound is
played back from the soundbar.
6. With the I 25,
can select and control the music tracks.

Interruption of the connection

The connection is interrupted if
... one of the devices is switched off;
... the Bluetooth
... the range (approx. 10 metres) is exceeded;
... you press the
LED is flashing. In this case, a new connection to an-
other device can be established immediately.
but-
®
®
, the de-
button 15 on the
I 21 and /II 24 buttons you
®
function is switched off;
buttons 15 or PAIR 5 until the blue
GB
®
®
7