4.0 Maintenance
4.1 General
4.2 Cleaning
Burner tray
[3]
[8]
Heat exchanger
Clean the air outlet louvres and housing
Flue gas fan
[3]
Air filter
Fitting a V-belt to type GCT/RE
Check the fan impellor(s) and belt tension, clean the impellor(s) if necessary. Check the belt tension after
20 to 40 hours of operation. Adjust the tension regularly during the first year of operation [13].
5.0 Description of parts
5.1 Automatic ignition control and gas combination units [6]
8