Trouble Shooting - Pkm WKS 66B Bedienungsanleitung

MALFUNKTION
The appliance
does not work at
all.
The compressor
does not work at
all.
The compressor
runs too long.
Unsatisfactory
cooling capacity.
Strong formation
of encrusted ice.

12. TROUBLE SHOOTING

POSSIBLE CAUSE
 The plug of the appliance is
not connected to the socket.
 The plug has become loose.
 The socket is not supplied with
energy.
 The fuse is switched off.
 Defrost mode is active.
 Incorrect energy supply..
 The
appliance
switched off for a while..
 Doors too often or too long
opened..
 The
door
opened.
 The door is not correctly
closed.
 Encrusted
ice
appliance.
 The
current
setting is too warm
 The appliance is overfilled.
 The door seals are damaged
 The door is not correctly
closed.

The door seal is damaged or
has been
was frequently
inside the
temperature
67
MEASURE
 Check
corresponding
socket by connecting
it with another
appliance.
 Check the fuse.
 The voltage is too
low. Compare the
data on the model
plate with the data
of your
supplier.
 Normal
procedure
while defrosting.
 Check the status of
the energy supply.
 The appliance needs
some time to reach
the
temperature.
 Do not open the
door too often or
too long.
 Choose a different
setting if necessary.
 Shut the door.
 Clean the door seal
with a soft cloth and
the
energy
preset