Changing Presettings With A Hand-Held Unit - SOLTRON M-60 BALANCE POWER Gebrauchsanweisung

Changing presettings with a hand-held unit

Some data can also be displayed and changed with a commercially avail-
able hand-held unit (e.g. from Palm). For this purpose you require special
software (available in German and English), which you can download at
www.soltron.de. The operating manual for this software is also available
at the same website.
Caution!
The code for access via the infrared interface is preset in the
software of the hand-held unit, and can therefore be used with
any unit. Anyone, who downloads the software from the Internet
can access the unit date with a hand-held unit. Please note that
Customer Service changes the preset access code during initial
start-up – see software operating manual. Please note the new
code for future use!
This code is independent of the access code for the presettings
via the control panel.
Note:
Please read the operating manual for the Soltron software for in-
structions on how to display or change data with a hand-held
unit.
Information on operating the hand-held unit is contained in the manufac-
turer's documentation.
121