SOLTRON M-60 BALANCE POWER Gebrauchsanweisung Seite 121

Defining a code
There is a Master Code and a Studio Code.
The Master Code allows access to all functions, the Studio Code allows
access to some functions that are necessary for service.
– Select Function 255 (Master Code) or 256 (Studio Code).
– Press the START/STOP button for 3 seconds until
pears.
– Press the desired buttons consecutively:
– Press the buttons in the same sequence when
again.
– appears in the display. The set code has been saved.
SICH
– Please note the code for Customer Service.
If you know the old code, you can define a new code at any time. We rec-
ommend that you already set a new access code during the initial start-
up.
120
ap-
_ _ _ _
appears
_ _ _ _