VEGA VEGAPULS WL 61 Betriebsanleitung Seite 48

9 Anhang
FF desciptor
FILL_HEIGHT_VALUE
FILL_HEIGHT_VALUE_UNIT
CONST_VALUE
SECONDARY_VALUE_1_
TYPE
SECONDARY_VALUE_2_
TYPE
FILL_HEIGHT_VALUE_Type
DIAGNOSIS
DIAG_MASK_1
DIAG_OUT_1
DIAG_MASK_2
DIAG_OUT_2
DEVICE_IDENTIFICATION
DEVICE_NAME
IS-SPARE_ELECTRONICS
DEVICE_VERSION_INFO
CALIBRATION_DATE
FIRMWARE_VERSION_ASCII Software version
HW_VERSION_ASCII
ADJUSTMENT_DATA
FIRMWARE_VERSION_MAIN Firmware versions major, minor, revision and build
PHYSICAL_VALUES
DEVICE_UNITS
APPLICATION_CONFIG
LINEARIZATION_TYPE_SEL
SIMULATION_PHYSCAL
INTEGRATION_DATA
DEVICE_CONFIG_PULS_
RADAR
ADJUSTMENT_LIMITS_MIN
ADJUSTMENT_LIMITS_MAX
FALSE_SIGNAL_COMMAND
FALSE_SIGNAL_CMD_
CREATE_EXTEND
FALSE_SIGNAL_CMD_DE-
LET_REGION
48
Description
Filling height. The unit is defined in "FILL_HEIGHT_VALUE_
UNIT"
Filling height unit
Constant value
Secondary value 1 type
Secondary value 2 type
Filling height value type
AITB Diagnosis
Manufacturer ID, device type, bus type ID, measurement prin-
ciple, serial number, DTM ID, device revision
Device name
Device name
Hard- and software version for system, function and error
Day, month and year
Hardware version
Min./max.-adjustment physical, percent and offset
Distance, distance unit, distance status, level and status
Distance and temperature units of the instrument
Medium type, media, application type, vessel bottom, vessel
height
Type of linearization
Physical offset and integration time
Electronics variant, probe type, max. measuring range, anten-
na extension length, adjustment propagation antenna extension
lprapproval configuration
Min. range min.-/max.- values physical, percent, offset
Max. range min.-/max.- values physical, percent, offset
VEGAPULS WL 61 • Foundation Fieldbus
Unit
%
%