Switching The Outside Ring On And Off; Locking/Unlocking The Control Panel; Using The Automatic Warm-Up Function - AEG Electrolux 79231KF-N Benutzerhandbuch

Switching the outside ring on and off

By switching the outside rings on or off, the effective heating surface can be matched to
the size of the cookware.
Before an outside ring can be switched on, the inside ring must be switched on
Double ring zone
To switch on outside ring
To switch off outside ring

Locking/unlocking the control panel

The control panel, with the exception of the "On/Off" sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
To switch on
To switch off
When you switch the appliance off, the locking function is automatically switched off.
Turning the STOP+GO function on and off
The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode
then back to the heat setting they were at before
To switch on
To switch off
STOP+GO does not stop timer functions.
STOP+GO controls the entire control panel apart from the sensor field

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. When setting a heat
setting using the automatic warm-up function, the cooking zone switches to full power
for a certain amount of time and then automatically switches back to the heat setting set.
Step
1.
Touch
Touch
Control panel
Touch
Touch
Control panel
Touch
Touch
Control Panel
Touch
Sensor field
for 1-2 seconds
for 1-2 seconds
(for 4 seconds)
previously set heat setting
Previous heat setting (not automatic warm-up or power
function)
Operating the appliance
Pilot light
Second pilot light lights up
Second pilot light goes out
Display
Display
.
Display
7