What To Do If - AEG Electrolux 79231KF-N Benutzerhandbuch

14

What to do if...

4. Rub the appliance dry using a clean cloth.
Type of dirt
sugar, food containing
sugar
plastics, tin foil
limescale and water
rings
fat splashes
shiny metallic discol-
oration
* Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist
shops
Remove stubborn residues with a cleaner for glass ceramic or stainless steel.
Scratches or dark stains on the glass ceramic that cannot be removed do not however affect
the functioning of the appliance.
What to do if...
Problem
The cooking zones will not
switch on or are not function-
ing
Acoustic signal sounds when
appliance is switched off
immediately when the appliance has
yes
yes
---
---
---
Possible cause
More than 10 seconds have
passed since the appliance was
switched on
The child safety device is
switched on
Several sensor fields were
touched at the same time
Automatic switch off has been
triggered
There is water on the control
panel, or the control panel is
covered with splashes
is active -
The control panel is wholly or
partly covered by objects.
Remove
cooled down
---
---
yes cleaner for glass ceramic
yes cleaner for glass ceramic
yes cleaner for glass ceramic
Switch the appliance on again.
Deactivate child safety device
(See the section "Child safety
device")
Only touch one sensor field
Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch the
appliance on again
Wipe the control panel
Switch off
Remove objects.
using
a scraper *
a scraper *
or stainless steel *
or stainless steel *
or stainless steel *
Remedy