Rehingeing The Door - AEG SANTO 70438-5 DT Benutzerinformation

Rehingeing the door

The side at which the door opens can
be changed from the right side (fac-
tory adjustment) to the left side, if
the installation site requires.
Warning! When changing the side at
which the door opens, the appliance
may not be connected to the mains.
Remove plug from the mains befo-
rehand.
Proceede as follows:
1. Remove the upper hinge taking care
for the upper door not to fall off and
keep it for future actions;
Remove the upper support and
mount it in the opposite side
2. remove the upper door;
3. unscrew the middle hinge. Unscrew
the plastic plugs located on the
opposite side of the central hinge and
introduce them in the holes occupied
before by the hinge;
4. remove the lower door;
5. pull off the ventilation grille which is
fixed by two screws;
6. remove the bottom hinge by unscrew-
ing its fixing screws;
7. using a 12 mm spanner, unscrew the
hinge pin and reassemble it on the
opposite side of the hinge;
8. adjust the level of the appliance by
screwing out the adjustable foot, or
feet, at the bottom of the cabinet
using your fingers or a tool;
9. reassemble the lower hinge on the
opposite side, using the screws previ-
ously removed. Slide the hole cover
out of the ventilation grille by push-
ing it in the direction of the arrow
and reassemble it on the opposite
side;
H
27