Burnhard Fred 941045 Bedienungsanleitung Seite 23

1. Unscrew the protective cap from the screw connect to the gas grill. Screw the
cap nut at the end of the hose onto the screw connect of the grill. Tighten the
cap nut with a wrench.
2. Put the gas cylinder into the cabinet.
3. Screw the cap nut of the hose onto the pressurestat's screw connect and tigh-
ten that connection with a wrench.
4. Screw the cap nut of the pressurestat onto the screw connect of the gas cylin-
der. Tighten the cap nut with your hand. Do not use any tools to prevent the
seal from damage.
5 kg (Height 480 mm, Diameter 240 mm)
9 kg (Height 500 mm, Diameter <298 mm)
Diameter
23