Klarstein 10031696 Handbuch Seite 16

2. . The ceiling must can bear at least 120KGs weight, and the thickness of the ceiling must be ≥30MM.
Pic 2
3. According to the drawing of pic.2 drill 14pcs X 8mm holes in the ceiling (see pic. 3).14pcs of ST6*40mm big
flat screws will be used to fix the hanging board on the ceiling.
Aufhängung
Pic 3
4. Calculate the length of the angle iron, and connect the angle iron with adjustable corner braces with 32pcs
M4*10 big flat screws and M4 nut( the overlap length of angle iron cannot less 36MM) See pic.4&pic.5.
einstellbare Eckklammern Winkeleisen
Pic 4 Pic 5
16