Symbols On The Recharger; General Safety Instructions For Power Tools - Parkside PABSW 10.8 B2 Betriebsanleitung

Symbols on the recharger:

Warning!
Before using for the first time, care-
fully read through the user manual
The recharger is for indoor use
only.
T3.15A
Protective temperature limiter
130°C
Protection class II
Electrical appliances must not be dis-
posed of with the domestic waste.
Green LED flashes
Red LED lights up
Green LED lights up
Battery such alleged charged
Green and red LED flashing
Green and Red LED light up
Battery is too hot or too cold
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Charger ready
Battery charging
Defective battery
Help symbols with information on
improving tool handling.
General safety instructions
for power tools
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, fire
and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-oper-
ated power tools (without power cord).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
GB
37