Using Optional Equipment; Auxiliary Audio Equipment - Sony MEX-BT3600U Bedienungsanleitung

The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
CLOCK-ADJ (Clock Adjust) (page 6)
CT (Clock Time)
To set "CT-ON" or "CT-OFF" (
BEEP
To set "BEEP-ON" (
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "RM NORM" (
z
commander in the factory-set position.
– "RM REV": when you mount the rotary
commander on the right side of the steering
column.
AUX-A* (AUX Audio)
1
To turn the AUX source display "AUX-A-ON"
( ) or "AUX-A-OFF" (page 20).
z
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off.
– "A.OFF-NO" (
z
"A.OFF-30M (Minutes)" or "A.OFF-60M
(Minutes)."
DEMO (Demonstration)
To set "DEMO-ON" (
DIM (Dimmer)
To change the brightness of the display.
– "DIM-ON": to dim the display.
– "DIM-OFF" ( ): to deactivate the dimmer.
z
A.SCRL* 2 (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/track is changed.
– "A.SCRL-ON" (
– "A.SCRL-OFF": to not scroll.
LOCAL (Local Seek Mode)
– "LOCAL-ON": to only tune into stations with
stronger signals.
– "LOCAL-OFF" (
MONO*
3 (Monaural Mode)
To improve poor FM reception, select monaural
reception mode.
– "MONO-ON": to hear stereo broadcast in
monaural.
– "MONO-OFF" (
stereo.
REG* 3 (Regional)
To set "REG-ON" (
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "LPF
OFF" ( ), "LPF125Hz" or "LPF 78Hz."
z
20
) (page 13, 14).
z
) or "BEEP-OFF."
z
): to use the rotary
), "A.OFF-30S (Seconds),"
) or "DEMO-OFF."
z
): to scroll.
z
): to tune normal reception.
z
): to hear stereo broadcast in
z
) or "REG-OFF" (page 13).
z
LOUD (Loudness)
To allow you to listen clearly at low volume
levels.
– "LOUD-ON": to reinforce bass and treble.
– "LOUD-OFF" ( ): to not reinforce bass and
z
treble.
DM+* 2
To set the DM+ function.
– "DM+-ON" ( ): to activate it.
z
– "DM+-OFF": to cancel it.
BTM (page 12)
BT INIT*
1 (page 18)
*1 When the unit is turned off.
*2 When CD/USB source is activated.
*3 When FM is received.

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
* Be sure to use a straight type plug.
AUX
AUX
Connecting cord*
(not supplied)