Eizo FlexScan T1721 Installationshandbuch Seite 6

Prior to use
Adjusting the Screen Angle
Hold left and right edge of the monitor with both hands, tilt the
screen to the best condition for working.
Attention
• Be sure that the cables are correctly connected.
Displaying the Screen
1
Press to turn on the monitor.
The monitor's power indicator lights up blue.
2
Turn on the PC.
The screen image appears.
When turning on the monitor and PC for the first time with the analog signal, the Auto Adjustment
function works to adjust the clock, phase, and display position automatically.
Installing the Touch Panel Driver
Attention
• The user account to be used for installing the touch panel driver must have the "Administrators" privilege.
• When reinstalling the touch panel driver to update the driver, etc., restart the PC after uninstalling the
driver and then install it.
1
Uninstall the other touch panel driver, if it is installed.
2
Install the touch panel driver according to the instructions included in the EIZO
LCD Utility Disk (CD-ROM).
For details, refer to the Installation Guide for Touch Panel Driver on the CD-ROM.
Attention
• Turn off the monitor and PC after using them. Unplugging the power cord completely shuts off power
supply to the monitor. Touch operation is effective until turning off both PC and monitor.
4
Installation Setting/Adjustment Troubleshooting