Technical Data - Olympia TBL 1300 Combo Bedienungsanleitung

Binding is faulty /
Loose sheets
If the problem cannot be solved, contact our Hotline; refer to Chapter
"Guarantee".
9

Technical Data

Indicator element:
Laminator
Maximum laminating width:
Max. thickness of document
for lamination:
Lamination foil thickness:
Laminating speed:
Warm-up period:
Indicator elements:
Special features:
Thermal binder
Maximum binding width:
Maximum binding capacity:
Binding time:
Warm-up period:
Recommended cooling time:
Indicator elements:
Special features:
5 mic or micron = abbreviation of the word micrometer (µm). 1 micrometer is one thousandth
of a millimetre.
Example: 75 µm = 0.075 mm. 100 µm = 0.1 mm. 125 µm = 0.125 mm.
The maximum binding
capacity was exceeded: Too
many sheets or the thermal
binding cover was too large.
The cooling down time was
too short.
TBL 1300 Combo
POWER LED (red)
320 mm
0.6 mm
75 to 125 mic
250 mm per minute
3 - 5 minutes
LED (green, red; flashing, continuously on)
Jam Release sliding switch
No blistering
Automatic shutdown on overheating
335 mm (for A4 size)
200 sheets (70g/m
in thermal binding cover ≤ 20 mm
Approx. 1 minute
3 - 5 minutes
10 minutes
LED (green, red; flashing, continuously on)
Optical and acoustic indication of ready to use
and end of binding states
28
Observe the maximum
binding capacity, refer to
Chapter "Technical Data"
and carry out the binding
again.
Allow the bound document
to cool down in the tray for
at least 10 minutes.
5
2
)