Herunterladen Inhalt Inhalt Diese Seite drucken

Candy grandO GO 1272 D Bedienungsanleitung Seite 43

Inhaltsverzeichnis

Werbung

DE
3) SCHLEUDERDREHZAHL
Sobald das Programm gewählt
wurde, erscheint auf dem Display
die höchstmögliche Tourenzahl
für dieses Programm. Durch
wiederholtes Drücken der Taste
wird die Schleuderdrehzahl
jeweils um 100 U/Min
herabgesenkt. Die
Mindestdrehzahl beträgt 400
U/Min, es ist jedoch auch
möglich, den Schleudergang
ganz zu unterdrücken, wenn man
die Taste Schleuderdrehzahl
wiederholt drückt.
4) ANZEIGE STARTZEITVORWAHL
Sie blinkt, wenn eine
Startzeitvorwahl eingestellt ist.
5) PROGRAMMDAUER
Wird ein Programm ausgewählt,
so wird automatisch die
maximale Programmdauer bei
voller Beladung angezeigt.
Diese Dauer kann sich je nach
den im Anschluss eingestellten
Zusatzoptionen ändern.
Nach dem Programmstart gibt
Ihnen die Anzeige ständig
Auskunft über die Restzeit zum
Programmende.
Die Waschmaschine berechnet
die Zeitdauer bis zum Ende des
ausgewählten Programms mit
der Annahme, dass es sich um
eine Standardwäschefüllung
handelt. Während des
Waschvorgangs berichtigt die
Waschmaschine die Zeitdauer
je nach Menge und Art der
Wäschestücke in der
Waschmaschine.
6) Anzeige "Kg DETECTOR" (aktiv
nur für die Programmgruppen
Baumwolle und Synthetik)
In den ersten 4 Minuten des
Programms bleibt die Anzeige
„Kg DETECTOR" eingeschaltet,
während das Gerät die Restzeit
zum Programmende aufgrund
der tatsächlich in der Trommel
eingefüllten Wäschemenge
errechnet.
7) VERSCHMUTZUNGSGRAD
Sobald ein Programm gewählt
wird, zeigt eine Anzeige den
voreingestellten,
mindestmöglichen
Verschmutzungsgrad an.
Wenn Sie eine höhere Stufe
durch Drücken der hierzu
vorgesehenen Taste wählen,
leuchtet die entsprechende
Anzeige auf.
CZ
3) OTÁâKY ODST¤EëOVÁNÍ
Po zvolení pracího programu
se na displeji objeví maximální
povolená rychlost
odstfieìování pro dan˘
program. KaÏd˘m dal‰ím
stisknutím tlaãítka
odstfieìování se rychlost sníÏí
o 100 g/m. Nejniωí povolená
rychlost je 400 ot/min.
Odstfieìování je moÏné zru‰it
opûtovn˘m stisknutím tlaãítka
na volbu odstfiedování.
4) KONTROLKA „ODLOÎEN¯
START"
Tato kontrolka svítí tehdy, kdyÏ
je nastavené posunutí
spu‰tûní pracího programu.
5) DÉLKA CYKLU
Pfii volbû programu se
automaticky urãí maximální
délka cyklu pfii plném
naplnûní, které se mÛÏe mûnit
podle zvolen˘ch moÏností.
Na základû standardní
náplnû spotfiebiã propoãítá
délku prání, která se v
prÛbûhu pracího cyklu upraví
podle objemu a sloÏení
náplnû.
6) Kontrolka "DETEKTOR
hmotnosti" (Tato funkce je
aktivní pouze u programÛ pro
bavlnu a syntetické látky)
Bûhem prvních 4 minut
provozu kontrolka "DETEKTOR
hmotnosti" zÛstává zapnutá
do té doby, dokud praãka
podle mnoÏství vloÏeného
prádla neurãí ãas zb˘vající do
konce cyklu.
7) STUPE≈ ZNEâI·TùNÍ
V momentu zvolení programu
se automaticky zobrazí nejniωí
moÏn˘ stupeÀ zneãi‰tûní a
rozsvítí se pfiíslu‰ná kontrolka.
Pfii zvolení vy‰‰í úrovnû
zneãi‰tûní pomocí pfiíslu‰ného
tlaãítka se také rozsvítí
pfiíslu‰ná kontrolka.
EN
3) SPIN SPEED
Once the programme has
been selected, the maximum
spin speed allowed for that
programme appears on the
display. Pressing the spin
button will reduce the speed
by 100 rpm each time the
button is pressed. The
minimum speed allowed is 400
rpm, or it is possible to omit the
spin by pressing the spin
button repeatedly.
4) DELAY START LIGHT
This flashes when delay start
has been set.
5) WASH CYCLE TIME
When a programme is selected
the display automatically shows
the maximum cycle duration for
a full load, which can vary,
depending on the options
selected. Once the programme
has started you will be kept
informed constantly of the time
remaining to the end of the
wash.The appliance calculates
the time to the end of the
selected programme based
upon a standard loading, during
the cycle, the appliance
corrects the time to that
applicable to the
size and composition of the
load.
6)Kg DETECTOR Indicator
Available on Cotton and
Synthetic cycles, during the first
4 minutes of the cycle the
intelligent sensor will weigh the
laundry and adjust the cycle
time, water and electricity
consumption accordingly.
7) DEGREE OF SOILING
When a programme is
selected the relevant indicator
will light up to show the
minimum possible degree of
soiling.
Selecting a greater degree of
soiling using the special button
will cause the corresponding
indicator to light up.
43

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis