Siemens PA20001M Gebrauchsanweisung Seite 42

10 sec/
Programming the appliance stop time
J Press the "Timer" key
cursor on the timer menu. The last function
programmed appears by default.
J Use the "+" and "–" keys to select the
"Stop" function
J Use the "down" key (see "up" and "down"
keys) to lower the cursor to the stop time
menu. Then use the "+" and "–" keys to
modify the stop time until the desired time is
reached.
J The time changes 15 minutes at a time.
Instructions for Use
, to position the
, (see "+" and "–" keys).
J Press the "Timer" key
seconds without touching any keys to
memorise the set stop time.
J The set time is displayed on the screen.
10 sec/
Turning the timer off
J Press the "Timer" key
cursor on the timer menu. The last function
programmed appears by default.
J Use the "+" and "–" keys to select the "Off"
function.
J Press the "Timer" key
seconds without touching any keys to turn
the timer off. No set time is displayed on the
screen.
42
, or wait for 10
, to position the
, or wait for 10