Technical Data; Noise/Vibration Information; Angle Grinder Safety Warnings; English - Milwaukee AG11 - 115 Originalbetriebsanleitung

TECHNICAL DATA

Angle Grinder
Production code
Rated input
Rated speed
D= Grinding disk diameter max.
d= Grinding disk hole diameter
d d
b= Cutting disk thickness min. / max.
D
b
d d
b= Grinding disk thickness max.
D
b
D D= Grinding surface diameter max.
D= Wiring brush diameter max.
D
Thread of work spindle
Weight according EPTA-Procedure 01/2003

Noise/Vibration Information

Measured values determined according to EN 60 745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration total values (triaxial vector sum) determined according
to EN 60745
surface grinding: Vibration emission value a
Uncertainty K=
Disk sanding: Vibration emission value a
Uncertainty K=
For other applications, e.g. Abrasive Cutting-O Operations or Wire Brushing other vibration values could occur.
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for di erent applications,
with di erent accessories or poorly maintained, the vibration emission may di er. This may signi cantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.

ANGLE GRINDER SAFETY WARNINGS

Safety Warnings Common for Grinding, Sanding, Wire
Brushing or Abrasive Cutting-O Operations:
a) This power tool is intended to function as a grinder,
sander, wire brush or cut-o tool. Read all safety warnings,
instructions, illustrations and speci cations provided with
AG 11-115
4161 21 01...
4106 06 01...
4106 01 01...
... 000001-999999
1100 W
11 000 min
115 mm
22,2 mm
1 / 3 mm
6 mm
115 mm
75 mm
M 14
2,5 kg
90,5 dB(A)
101,5 dB(A)
6,3 m/s
h,SG
1,5 m/s
5,0 m/s
h,DS
1,5 m/s
this power tool. Failure to follow all instructions listed below may
result in electric shock, re and/or serious injury.
b) Operations such as polishing are not recommended
to be performed with this power tool.Operations for which
the power tool was not designed may create a hazard and cause
personal injury.
c) Do not use accessories which are not speci cally
designed and recommended by the tool manufacturer. Just
because the accessory can be attached to your power tool, it does
not assure safe operation.
AG 11-125
4161 31 01...
... 000001-999999
1100 W
11 000 min
-1 -1
125 mm
22,2 mm
1 / 3 mm
6 mm
125 mm
75 mm
M 14
2,5 kg
90,5 dB(A)
101,5 dB(A)
6,3 m/s
2 2
1,5 m/s
2 2
5,0 m/s
2 2
1,5 m/s
2 2
AG 11-125 X
4161 41 01...
... 000001-999999
1100 W
11 000 min
-1
125 mm
22,2 mm
1 / 3 mm
6 mm
125 mm
75 mm
GB
M 14
2,5 kg
90,5 dB(A)
101,5 dB(A)
6,3 m/s
2
1,5 m/s
2
5,0 m/s
2
1,5 m/s
2

English

11