Additional Information; Control Elements - Beurer IL 30 Gebrauchsanweisung

Always close your eyes during the radiation! The recommended duration of treatment is maximum
12 minutes.
We recommend selecting a shorter radiation period to start with. However, the skin of some people may
show an over-sensitive (e.g. with extreme redness, blistering, itching, heavy sweating) or allergic reaction
to heat radiation, even when the lamp is used correctly. Examine the radiated section of the body regu-
larly. Discontinue radiation immediately if any signs of an over-sensitive or allergic reaction appear and
consult a physician.
The appliance has an adjustable lampshade. The four positions of inclination make it possible for you to
adjust the infrared lamp according to your needs.

Additional information

The timer of the IL 30 offers additional comfort. The timer is provided with a sliding switch which makes
it steplessly adjustable up to 12 minutes. The timer can be used as a time stop. In case you do not want
to use the timer function, select the
length of use. Prolonged use can damage the skin!

control elements

Sliding switch
Continuous setting ( )
Off (0)
Length of radiation /min. (maximum 12 minutes)
cleaning/changing the infrared lamp
Before every cleaning and when exchanging the infrared lamp, the appliance must be switched off, dis-
connected from the mains and must be cool.
The appliance can be cleaned with a damp cloth. Do not use any cleaning agents containing solvents
on the appliance. Ensure that no water penetrates the appliance. Use the appliance again only when it is
completely dry. Please note that only infrared lamps of the original type may be used as replacements.
Appliance: Replacement infrared lamp (type): specifications:
IL 30 Infrared PAR 38 E (150 W)
!
Important information –
Please retain for later use
Please read the information carefully and keep it accessible for other users.
• The lamp housing and the infrared lamp become very hot during operation. There is a risk of burning if
these are touched. Always let the lamp cool down first before touching it.
• Remove all packaging material before the appliance is used.
• The appliance may only be connected to the mains voltage mentioned on the type plate.
• While using the lamp on the face, always keep the eyes closed in order to avoid injury to the eyes (do
not look directly at the infrared light).
• This device is not intended for use by persons (including children) with restricted physical, sensory or
mental capabilities and/or by persons lacking the required understanding of the equipment and how
it is used, unless they are supervised by a person who is responsible for their safety or they are given
instructions on how to use the device.
Children should be supervised to ensure that they do not use the device as a toy.
• Do not use it on persons sensitive to heat.
setting (continuous setting). In this case, pay attention to the
2
1
230V ~ 50 Hz
5
3
4
0 2 4 6 8 10
Explanation of symbols:
Note - read operating
instructions.
Application part Type B
Protection class II unit
Caution: hot surface
12