PeakTech 1265 Bedienungsanleitung Seite 93

3.3. Right side panel
1. USB Host port:
2. USB Device port: It is used to transfer data when external USB equipment connects to the oscilloscope
3. VGA port:
4. LAN:
Fig. 2 Right side panel
It is used to transfer data when external USB equipment connects to the oscilloscope
regarded as "Host equipment". For example: upgrading software by USB flash disk
needs to use this port.
regarded as "Device equipment". For example: to use this port when connect PC to the
oscilloscope by USB.
To connect the oscilloscope with a monitor or a projector as VGA output.
To integrate this oscilloscope into a network.
-92-
1.
2.
3.
4.