Storing And Recalling Broadcast Frequencies; Tuning In Strong Signals; Storing The Strongest Broadcast Frequencies - Pioneer DEH-3400R Bedienungsanleitung

Tuner
Storing and recalling broadcast
frequencies
If you press any of the
you can easily store up to six broadcast frequen-
cies for later recall with the touch of a button.
When you find a frequency that you want to
store in memory press a
ton and hold until the preset number stops
flashing
.
The number you have pressed will flash in the
PRESET NUMBER
The selected radio station frequency has been
stored in memory.
The next time you press the same
button the radio station frequency is
ING
recalled from memory.
Notes
• Up to 12 FM stations, 6 for each of the two FM
bands, and 6 MW/LW stations can be stored
in memory.
• You can also use 5 and ∞ to recall radio sta-
tion frequencies assigned to
buttons.
7 En
PRESET TUNING
PRESET TUNING
indicator and then remain lit.
PRESET TUN-
PRESET TUNING

Tuning in strong signals

Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
buttons
good reception.
1 Press
on.
Local seek sensitivity (
but-
play.
2 When you want to return to normal seek
tuning, press
tuning off.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automati-
cally store the six strongest broadcast frequen-
cies under
once stored there you can tune in to those fre-
quencies with the touch of a button.
Press and hold
seconds to turn
begins to flash. While
BSM
six strongest broadcast frequencies will be
stored under
of their signal strength. When finished,
stops flashing.
• To cancel the storage process, press
LOCAL/BSM.
Note
• Storing broadcast frequencies with BSM may
replace broadcast frequencies you have saved
using
to turn local seek tuning
LOCAL/BSM
) appears in the dis-
LOC
to turn local seek
LOCAL/BSM
buttons
PRESET TUNING
for about two
LOCAL/BSM
on.
BSM
BSM
PRESET TUNING
.
PRESET TUNING
and
1–6
is flashing the
buttons in order
BSM