Ambient Temperature And Ventilation; Connecting The Appliance - Bosch KSW36PI30 Gebrauchsanleitung

Ambient temperature
and ventilation
Ambient temperature
The appliance is designed for a specific
climate class. Depending on the climate
class, the appliance can be operated at
the following temperatures.
The climate class can be found on
the rating plate. Fig. 1
Climate class
SN
N
ST
T
Note
The appliance is fully functional within
the room temperature limits
of the indicated climatic class. If
an appliance of climatic class SN
is operated at colder room temperatures,
the appliance will not be damaged up to
a temperature of +5 °C.
Ventilation
Fig. 3
The air on the rear panel and on the side
panels of the appliance heats up.
Conduction of the heated air must
not be obstructed. Otherwise,
the refrigerating unit must work harder.
This increases power consumption.
Therefore: Never cover or block
the ventilation openings!
Permitted ambient
temperature
+10 °C to 32 °C
+16 °C to 32 °C
+16 °C to 38 °C
+16 °C to 43 °C
Connecting
the appliance
Have a technician install and connect
the appliance according to the enclosed
installation instructions.
Do not remove the transportation
protection devices from the shelves and
storage compartments until
the appliance has been installed.
Always connect the water before
the power.
Apart from statutory national regulations,
you should stick to the connection terms
relating to the local electricity and water
companies.
After installing the appliance, wait at least
1 hour until the appliance starts up.
During transportation the oil
in the compressor may have flowed into
the refrigeration system.
Before switching on the appliance for
the first time, clean the interior
of the appliance (see chapter "Cleaning
the appliance").
en
25