Herunterladen Diese Seite drucken

teutonia TeamCosmo Bedienungsanleitung Seite 12

Vorschau ausblenden Andere Handbücher für TeamCosmo:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
INT
TEAM COSMO
Height-Adjustable, Foldable Handle
Applying the Parking Brake
wheel rim. Make sure that the brake has locked securely.
You can release the brake by depressing the brake lever 2.
Attaching and removing the sports buggy seat or
carry-cot (upper section)
Place the upper section (sports buggy seat or carry-cot)
onto the pram chassis in such a way that the lateral bars 1
of the upper section click into the slots provided 2 on each
side of the chassis and push the upper section in as far as
it will go. The locks then close automatically. (The locks
must "click" into place.)
Warning:
Before use, check that the pushchair seat or
the carry-cot has clicked into place correctly.
The upper section is secure if the red field in
the release lever is no longer visible. To remove
the upper section press the safety lever (3) up
and then the release lever (4) down until the
lever locks. (red field appears). Then pull the
upper section out of the slots and remove it.
12
To change the height of the
handle, press in the adjusting
buttons on both sides of the
handle.
The brake is activated by push-
ing down the long brake lever
1.
If
it
is
difficult
apply the brake, wheel the
stroller back and forth a few
centimetres so that the brake
bars engage properly in the
How to use the hood
Push the insert pieces for the hood joints into the corres-
ponding openings on the armrest or on the carry-cot.
Attention: You must secure the press studs on the back
end of the cover onto the rear of the backrest as the cover
is also used as a protection against falling out.
If you need to remove the hood, undo the press studs on
the rear of the backrest; press the release buttons on the
insert pieces of the hood joints and pull the joints out of the
openings. You can open the zip at the top of the hood for
ventilation.
Adjusting the Backrest
to
Adjusting the foot rest
Pull the grip 1 upwards and
move the backrest 2 into the
required
position.
make sure that the backrest
re-engages properly.
For the lying position, lift the
foot rest and press the bar into
the notches.
To fold down, raise the foot
rest slightly and press the bar
out of the notch.
Please

Werbung

loading