Master/Slave Mode; Sound Control Mode - EuroLite 4 x PAR-36 TCL LED black Bedienungsanleitung

15- Channel Mode:
(compatible with EUROLITE DMX LED Operator 4, item no. 70064504)
CH 1 CH 2
Dimmer
0 - 9
(0-255)
10 - 29 Dream
30 - 49 Meteor
50 - 69 Fade
70 - 89 Change
90 - 109 Flow 1
no
110 - 129 Flow 2
function
130 - 149 Flow 3
150 - 169 Flow 4
170 - 189 Flow 5
190 - 209 Flow 6
210 - 229 Flow 7
230 - 249 Flow 8
Sound Sensi-
250 - 255
control tivity

MASTER/SLAVE MODE

The master/slave-operation enables that several devices can be synchronized and controlled by one master-
device.
On the side panel of the 4 x PAR-36 TCL LED Audience Blinder you can find an XLR-jack and an XLR-plug,
which can be used for connecting several devices.
This device then works as master-device and controls the slave-devices, which are to be connected to the
Press the MODE button to select the SLAVE mode. The devices set in this manner can now be controlled by
the master unit.
Please press the ENTER button to confirm and to exit the SLAVE Mode.

SOUND CONTROL MODE

Press the MODE button and choose Sound Controlled Mode (SOUND).
Press the ENTER button to select the desired sensitivity and frequency of the loops, respectively.
Please press the ENTER button again to confirm and to exit the SOUND Mode.
CH 3 CH 4 CH 5 CH 6
Red1 Green Blue1
(0 - 1 (0 - (0 –
255) 255) 255)
Flash Speed
(10 - (0 -
255) 255)
No No
funct. funct.
master-device via a stereo shielded cable.
Connect the DMX OUT jack with the DMX IN plug of the next
device.
The desired sensitivity (SENS 00-31) and frequency of the loops
(Frequency = FQN 01-99) can be selected via the UP or DOWN
buttons.
CH 7 CH 8 CH 9
Red2 Green Blue2 Red3
(0 – 2 (0 - (0 –
255) 255) 255)
26/27
CH CH CH CH
10 11 12 13
Green Blue3 Red4
(0 – 3 (0 - (0 – (0 –
255) 255) 255) 255)
00057587.DOC, Version 1.0
CH CH
14 15
Green Blue4
4 (0 - (0 –
255) 255)