Auto Mode; Dmx Mode - EuroLite 4 x PAR-36 TCL LED black Bedienungsanleitung

Note: Under Chasers FLOW 8 and FLOW 9 there are 2 sub-programs to choose from (C1, C2). Please
press the ENTER button twice to reach the sub-programs. The desired color combinations can be selected
via the UP or DOWN buttons.
1. Static colors
2. Dream
3. Meteor
4. Fade
5. Change
6. Flow 1
7. Flow 2
8. Flow 3
9. Flow 4
10. Flow 5
11. Flow 6
12. Flow 7
13. Flow 8
C1: BLA-RGB C2: BLA-RGB
14. Flow 9
C1: BLA-RGB C2: BLA-RGB

AUTO MODE

In Auto Mode, the chasers are called up automatically in a continuous loop.
Press the MODE button to select the AUTO mode.
99) can be selected via the UP or DOWN buttons.
Please press the ENTER button to confirm and to exit the AUTO Mode.

DMX MODE

The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the 4 x PAR-36 TCL LED Audience Blinder will respond to the controller.
Controlling:
After having addressed the 4 x PAR-36 TCL LED Audience Blinder, you may now start operating it via your
lighting controller.
Note: It's necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order
to ensure proper transmission on the DMX data link.
Blackout, red-yellow-green-cyan-blue-purple-white;
Flash 00 - 99
Seven color dreaming
Seven color flow
Seven color fade
Seven color change
Seven color chase in 1 direction
Seven color chase in 2 directions
Seven color chase relay in 1 direction
Seven color chase relay in 2 directions
Seven color chase from 2 sides to the middle
Seven color chase from the middle to 2 sides
Seven color chase
Two color chase in 1 direction:
Blackou, red-yellow-green-cyan-blue-purple-white
Two color chase in 2 directions:
Blackout, red-yellow-green-cyan-blue-purple-white
Press the ENTER button to select the desired frequency of
the loops.
The desired frequency of the loops (Frequency = FQN 01-
23/27 00057587.DOC, Version 1.0