Operation; - Standalone Mode; Auto Mode - EuroLite LED PST-15W MK2 COB Floor DMX Spot Bedienungsanleitung

The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Lighting effects must not be connected to dimming-packs.

OPERATION

After you connected the EUROLITE LED PST-15W MK2 COB Floor DMX Spot/Wash to the mains, the
device starts running.
The LED display lights up and you can now choose the desired settings via the buttons MODE, ENTER, UP
and DOWN.
- DMX mode
- Channel selection mode

- Standalone mode

- Sound mode
- Dimmer setup
Menu
Hauptmenü
DMX mode
Channel
Slave mode
Static
Sound
IR. Remote
Fixture ID
Dimmer
Interne Programme
1. Static
2. Change
3. Chang4
4. Fade
Untermenü
001 – 512
4/6/7
1. Static
2. Change
3. Chang4
4. Fade
Sens: 01 – 31
ON/OFF
01/02
Werte
R00 – 99
G00 – 99
B00 – 99
W00 – 99
F00 – 99
Sp01 – 99
F00 - 99
Sp01 – 99
F00 - 99
Sp01 – 99
F00 – 99
Funktion
DMX address setting
DMX channel setting
No function
Static colors RGBW
Strobe speed
15 colors change w/ increasing speed
Strobe speed
Color change RGBW w/. incr. speed
Strobe speed
15 colors fade w/ increasing speed
Strobe speed
Sensitivity for audio mode
IR remote On/Off
Password: 050
Effekt
R: 0 – 100%
G: 0 – 100%
B: 0 – 100%
W: 0 – 100%
Strobe (1 Hz – 20 Hz)
15 colors change
Strobe speed
4 colors change
Strobe speed
15 colorsfade
Strobe speed
20/24 00095856.DOC, Version 1.1