Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX-controlled operation
You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. The individual channels and their features are listed under DMX-protocol.
Addressing
The Control Board allows you to assign the DMX starting address, which is defined as the first channel from
which the LED B-15 will respond to the controller.
If you set, for example, the address to channel 7, the LED B-15 will use the channel 7 to 12 for control.
Please, be sure that you don't have any overlapping channels in order to control each LED B-15 correctly
and independently from any other fixture on the DMX-chain.
If several LED B-15 are addressed similarly, they will work synchronically.
In order order to control the device via DMX, DIP-switch no. 10 must be set to OFF, the starting address is
selected via DIP-switches 1-9.
Note:
It's necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to
ensure proper transmission on the DMX data link.
Occupation of the DIP-switches:
Now you can start operating the LED B-15 via your lighting controller.
DMX-protocol
Control-channel 1 - PAN-rotation
Decimal
Hexad.
0 7
00 07
8 123
08 7B
124 131
7C 83
132 247
84 F7
248 255
F8 FF
Percentage
S/F
0% 3%
S
3% 48%
F
49% 51%
S
52% 97%
F
97% 100%
S
22/24
Feature
No rotation
Forwards PAN-rotation with increasing speed
No rotation
Backwards PAN-rotation with decreasing speed
No rotation
00047150.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
