Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENJOYING SURROUND SOUND
You can enjoy multi channel surround sound by changing the beam mode using the beam mode buttons on the remote
control. Select 3 beam, 5 beam and stereo plus 3 beam for multi channel playback.
Note
When ANGLE TO WALL OR CORNER is set in MANUAL SETUP (see page 59), 5 beam and 3 beam cannot be selected.
AUTO
VOL MODE
SETUP INPUTMODE
5BEAM
ST+3BEAM
1
STEREO
MY BEAM
4
MUSIC
7
OFF
0
CH LEVEL
TEST
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
TV/AV
2
Press one of the beam mode buttons
(5BEAM, ST+3BEAM or 3BEAM) to select the
desired beam mode for 5.1-channel play
back.
5BEAM
ST+3BEAM
1
40
En
ENJOYING SURROUND SOUND
SLEEP
3BEAM
2
3
SURROUND
5
6
MOVIE
SPORTS
8
9
+10
MENU
TV/AV
ENTER
YSP
RETURN
YSP
3BEAM
2
3
5 beam
Outputs sound beams from the front left and right, center,
and surround left and right channels. This mode is ideal
for enjoying surround sound effects to the fullest when
watching DVDs recorded in a multi-channel format or
playing back 2-channel sources in a multi-channel format.
Press 5BEAM on the remote control to select the
5 beam.
5BEAM
1
Notes
• To achieve the best surround sound effect, make sure that there
are no obstacles placed in the path of sound beams in that the
objects may prevent the beams from rebounding directly off the
walls in your listening room.
• The front left and right sound beams are output towards the
walls in your listening room.
• If you press 5BEAM, "SP Pos. Corner!" appears in the front
panel display when INSTALLED POSITION is set to ANGLE
TO WALL OR CORNER.
Werbung
Kapitel
Inhaltsverzeichnis
