Cleaning And Care - Silvercrest SHBS 1000 B1 Bedienungsanleitung

Cleaning and care

DANGER
Danger to life due to electric shock!
► Pull the power supply unit
appliance.
► Never touch the power supply unit
plugging it in or unplugging it.
► Always keep the power supply unit
CAUTION
Possible damage to the appliance.
► The hair and beard trimmer may never be immersed in water or other fl uids
for cleaning, since the appliance is not watertight. If this is done, live parts
(batteries) can be damaged.
► Do not use aggressive or abrasive cleaning agents, as these can damage
the upper surfaces.
► Clean the housing exclusively with a soft damp cloth and a mild dishwashing
liquid.
♦ Switch the hair and beard trimmer off by pressing the ON - OFF switch
♦ Disconnect the cable from the appliance and pull the power supply unit
of the power socket.
♦ Take the cut length add-on
♦ If necessary, you can wash the cut length add-ons
♦ Always dry the cut length add-ons
♦ To remove the trimmer block
against the shaving head teeth from the front.
♦ Use the cleaning brush supplied to remove any residual hair from the trimmer
block
♦ Once you have completed cleaning, plug the trimmer block plug-in tab
into the mounting opening in the shaving head holder (see Fig. E).
♦ Allow the trimmer block
(see Fig. F).
NOTE
► In order to reduce friction, occasionally apply a couple of drops of scissor
oil (accessory) between the blades, and then distribute it evenly. You can
also use any acid-free oil (e.g. sewing machine oil). Wipe any access oil
off with a cloth.
SHBS 1000 B1
6
off the appliance.
7
.
to engage again by pressing lightly from behind
out of the power socket before cleaning the
with wet hands, especially when
6
and the cable dry.
6
under running water.
7
thoroughly afterwards.
7
from its holder (see Fig. D), press your thumbs
GB
3 .
out
6
back
39