Silvercrest IAN 72059 Bedienungsanleitung Seite 9

3) Fill the kettle...
–
–
4) First close the lid and then place the kettle on the base 3 such that it sits
securely on the base 3.
5) Now insert the plug into the mains power socket.
6) Press the ON/OFF switch 2 downwards so that it engages.
7) The integrated indicator light in the ON/OFF switch 2 indicates that the
appliance is now heating up.
8) The appliance switches itself off and the control lamps go out as soon as
the water is on the boil. The ON/OFF switch 2 springs out.
WARNING - RISK OF INJURY!
► For safety reasons, the lid should not be opened while the water is boiling
or is very hot. There is a risk of receiving severe scalds.
WARNING - PROPERTY DAMAGE!
► First remove the plug from the mains power socket before you lift the carafe
from the base 3. This avoids the risk that any water splashing out could
come into contact with live electrical connections in the base 3, which
could cause a short circuit.
INFORMATION
► This appliance is fi tted with an overheating protector: if the appliance is
switched on accidentally, without any water in the kettle, the appliance
automatically switches itself off .
If, for example due to a non-closed lid the appliance boils dry, the appliance
switches off automatically.
In such cases fi rst allow the appliance to cool down before using it again.
SWKCD 3000 A1
to at least the MIN mark, so that the appliance does not overheat,
to no higher than the MAX mark, so that boiling water cannot spill out.
GB
7