FLORABEST FHE 710 A1 Originalbetriebsanleitung Seite 48

GB
Contents
Introduction ...............................49
Intended purpose .......................49
General description ....................49
Enclosed parts.............................. 49
Overview .................................... 50
Technical Data ............................50
Notes on safety..........................51
Symbols used in the instructions ...... 51
Symbols used on the device ........... 51
General Safety Directions for Power
Tools .......................................... 52
Chain saw safety warnings ............ 54
Causes and operator prevention of
kickback ...................................... 55
Further safety directions ................. 56
Fitting ........................................57
Assembling the Round Handle ........ 57
Attaching/setting the shoulder
Strap........................................... 58
Installing the sawing chain and
blade ......................................... 58
Tensioning the saw chain ............... 58
Chain lubrication .......................... 59
Operation startup ......................59
Before starting, check .................... 59
48
Switching On and Off ................... 60
Checking the oil automation .......... 60
Adjusting the Telescopic Handle ..... 60
Adjusting the handle ..................... 60
Transport ..................................60
Sawing techniques .....................61
Sawing Off Small Branches ........... 61
Sawing Off Larger Branches .......... 61
Sawing Off Parts .......................... 61
Working Safely ..........................62
Cleaning/Maintenance/Storage ..62
Cleaning ..................................... 62
Resharpening of the saw chain ....... 62
Storage ....................................... 62
Waste disposal and environ-
mental protection .......................63
Spare parts ................................63
Maintenance Interval Table ........64
Trouble shooting ........................65
Guarantee .................................66
Repair Service ............................67
Service-Center ............................67
Importer ....................................67
Translation of the original EC
declaration of conformity ...........68
Exploded Drawing .....................69