Ethernet / Lan Port - WolfVision VZ-C32 3 Bedienungsanleitungen

USB Device Port (to the computer)
The USB device port (#17) can be used for direct connections between the Visualizer and a computer. This
way, a Visualizer can be controlled and can be used as a scanner for 3-dimensional objects. Images in JPG,
TIF or BMP format can be taken in a fraction of a second - much faster than with a desktop scanner.
WolfVision's USB Software (Connectivity Software) works under Windows 2000, XP, Vista and 7 (32 and
64-bit) as well as Apple Macintosh. It is fully TWAIN/WIA compatible. This is important when using
Visualizers in connection with graphic programs such as Photoshop, or for connecting them to Interactive
Whiteboards (Smart Boards).
The fast USB 2.0 port can also output live motion. WolfVision's Connectivity Software can store AVI files
and includes a video capture driver. You can view and save the live image from the Visualizer on your
computer in almost every modern video editing software.
Please download the latest version of the WolfVision Connectivity Software from:
www.wolfvision.com/support.
Pictures which are stored with the WolfVision Connectivity Software includes EXIF data, if file format JPG
or TIFF is used. Included data are:
Manufacturer = WolfVision
Visualizer model (inclusive serial number) = i.e. VZ-C32-3 (00103701)
Firmware version = i.e. V1.22b
Date and time of create = i.e. 2012-04-15 11:06:29 (yyyy-mm-dd hh:mm:ss)

Ethernet / LAN Port

The LAN port (#19) makes the Visualizer a part of the internal computer network and it can be used for
communication over the Internet, if it is assigned an official (WAN) IP address.
Administrators of a larger number of Visualizers can use the LAN port to control, support and update all of
their units from their local desktop PC.
The list of applications for the Visualizers LAN port is constantly increasing. It can be used for controlling,
capturing still images, viewing live video streams, firmware updates, adjustments, menu settings and
maintenance purposes.
The following protocols are supported: TCP/IP, IGMP, UDP and ARP.
Supporte d (tested) internet b
By default, DHCP is activated to receive all network settings automatically.
Possible image transfer resolution up to SXGA- (1280x960).
In order to prevent unauthorized users from logging into the Visualizer over the network, it is possible to set
administrator and user passwords. The transmission of the passwords over LAN is encrypted with Md5.
The Visualizer offers streaming of live images in UDP Multicast/Unicast and TCP Singlecast mode.
Technical Background: UDP Multicast works like a broadcast - many clients are watching the same video
stream. In Multicast mode the bandwidth is always the same, no matter how many computers are
connected. However as many routers do not support Multicast, UDP Unicast can be used instead for point-
to-point connection (one client is possible).
In TCP Singlecast mode each computer opens a separate connection to the Visualizer, which requires a lot
of bandwidth if many clients are connected (max. 64 clients are possible).
Please check the separate description of "Built-In WebServer" on our internet homepage at:
www.wolfvision.com/support (or on the supplied CD-Rom).
For full functionality JAVA version 1.5.0 or higher is necessary.
For full functionality following ports are necessary: 50915, 50913, 8800 and 8801 (by default).
External Infrared (IR) Sensor
In some rooms the 3 built-in infrared receivers of the Ceiling Visualizer may not be enough. In this case
connect the supplied external infrared receiver to the IR-sensor plug (#13) and position the IR-sensor
somewhere on the ceiling (or in the room) where the users normally point the remote control at.
rowsers are: Internet Explorer, Netscape Navigator and Mozilla
13
10BASE-T/100Base-TX
/Firefox
IMPORTANT
.