Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Image Turn Mode (for higher resolution)
Working surface:
A
pick up the document
Picking up a complete vertical (portrait) document or A4 page has always been a critical issue for a
Visualizer because the image
The camera could only use 50% of its pixels to pick up a vertical (portrait) page. WolfVision's
mode solves this problem.
Just place your document (or other vertical object)
completely, so that approx. 90% of the pixels of the built-in camera are used to pick up the document, then
press the IMAGE TURN key (#22). The Visualizer turns the picture electronically 90 and outputs it correctly
with a much higher resolution than in normal mode. The left and right margins will be black.
Built-in Digital Scaler (for Extern-in and USB-Stick)
The Visualizer has a built-in digital image scaler which can process the signal from the external input and
output it in the same mode as the Visualizer image (For example: If the Visualizer is set to output an SXGA
image to the projector and the computer outputs an XGA signal, the scaler of the Visualizer converts the
XGA image of the computer to SXGA. As a result the projector does not readjust the input mode when
switching between the Visualizer and computer image).
In addition images on a connected USB-stick are automatically scaled to the current output mode of the
Visualizer.
The output resolution of the Visualizer can be changed in the on-screen menu (see page 16).
Integrated Seamless Switch
The Visualizer has an integrated Seamless Switch.
This allows for a seamless transition (fade-over/dissolve effect) when switching between the Visualizer
image, the image from the external input, the internal image memory of the Visualizer and images on an
USB-stick. This feature makes switching from one media to the other appear very smooth and professional.
The behavior of the Visualizer can be changed in the on-screen menu (see page 16).
Picture in Picture (PiP)
Normal mode:
Only 50% of the
pixels are used to
Image turn mode:
90% of the pixels
are used to pick
up the document
wa
s always picked up in a horizontal (landscape) format.
The Picture in Picture Mode offers the possibility to show two different
pictures at the same time on one screen. Just press the assigned
PRESET key
current picture (i.e. external signal, image memory) will be shown in the
lower left corner and the live image will be shown in the upper right corner.
The size of the live image is much bigger.
The content of the live image can be changed i.e. by recalling a stored
image memory.
Following comparisons are possible: Extern-In, image memory, live
image. The content from the small image is frozen, except when the signal
from the Extern-In is shown.
Output picture:
A
A
on the working surface horizontally and zoom in on it
(PiP Mode)
to activate the Picture in Picture mode. The
12
"Image turn"
º
Werbung
Inhaltsverzeichnis
