Operation; Stand Alone-Mode; Auto-Mix Color-Mode; Sound Control - EuroLite LED PAR-36 RGB Audience Blinder Bedienungsanleitung

OPERATION

After you connected the spot to the mains, the EUROLITE LED PAR-36 RGB Audience Blinder starts
running.

Stand Alone-Mode

You can do without a controller as the LED PAR-36 RGB Audience Blinder features a built-in microphone,
which provides automatic sound control. You can adjust the sensitivity with the rotary-control on the rear
panel.
In order to select Stand Alone Mode, first set dip switch 10 to ON and then switch on your device.

Auto-Mix Color-Mode

In order to select Auto-Mix Color Mode, set dip switch 9 and 10 to ON and 8 to OFF. Select the Strobe
function via dip 7. Speed (increasing) can be controlled by setting the dip switches 1 – 6 to ON
In order to select Auto-Mix Color Mode without strobe, set dip switch 7 to OFF and dip switch 9 and 10 to
ON. Speed (increasing) can be controlled by setting the dip switches 1 - 6 to ON.
In order to select Auto-Mix Color Mode with strobe, set dip switch 7 to ON and 8 to OFF.
Speed (increasing) can be controlled by setting the dip switches 1 - 6 to ON.

Sound Control

In order to select Sound Control, first set dip switch 10 to ON and 8 and 9 to OFF. Select the Strobe
function via dip 7. Adjust the sensivity via the Sensivity control. You can select one of six different settings.
1. 31-built-in, mixed color change without strobe.
2. 31-built-in, mixed color change with strobe.
22/26 00049271.DOC, Version 1.1