OPERATION
After you connected the lighting chain to the mains, the LEDs start burning.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
There are no serviceable parts inside the device. If defective, please dispose of the unusable lighting chain
in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption/tube:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Maximum total length:
LEDs/meter:
LEDs/tube:
LED-distance:
Tube-diameter:
Weight/tube:
Accessories:
RUBBERLIGHT Mounting clip 50 pieces
LED RUBBERLIGHT 1-ch.connector with plug
RUBBERLIGHT end cap
RUBBERLIGHT 1-channel T-piece connector
RUBBERLIGHT 1-channel X-connector
Self adhesive mounting w/ tie strap 10pcs
180cm installation channel f. RUBBERLIGHT
Please note: Every information is subject to change without prior notice. 19.05.2016 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state):
C
230 V AC, 50 Hz ~
70 W
45° C
60° C
0.5 m
0.1 m
44 m
24
1056
42 mm
13 mm
6.5 kg
No.
50510100
50506300
50510120
50510130
50510135
50510150
50510170
11/12
00074429.DOC, Version 1.8