Cleaning And Maintenance; Replacing The Fuse; Technical Specifications - EuroLite LED PAR-36 RGB Audience Blinder Bedienungsanleitung

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

Replacing the fuse

If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Article:
Power supply:
Power consumption:
Number of DMX channels:
Number of LEDS:
Dimensions (LxWxH):
Weight:
Accessory:
EUROLITE TH-50H Theatre hook, silver
EUROLITE TH-90 Theatre hook for 50mm pipe No. 58000720
EUROLITE TH-200 Theatre hook, silver
Safety bond AG-15 4x1000mm up to 15kg
Please note: Every information is subject to change without prior notice. 06.10.2009 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
42103480
230 V AC, 50 Hz ~
80 W
7
488
485 x 105 x 870 mm
9 kg
No. 58000653
No. 58000740
No. 58010364
42103482
230 V AC, 50 Hz ~
80 W
7
488
485 x 105 x 870 mm
9 kg
No. 58000720
No. 58010364
26/26 00049271.DOC, Version 1.1