Options - IKEA LAGAN Bedienungsanleitung

ENGLISH
1)
Programme
2)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the programme duration and the consumption values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with
normal soil. (This is the standard programme for test institutes).
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

Options

Acoustic signals
The acoustic signals operate when the ap-
pliance has a malfunction and it is not pos-
sible to deactivate them.
There is also an acoustic signal that oper-
ates when the programme is completed. By
default, this acoustic signal is on, but it is
possible to deactivate it.
How to deactivate the acoustic signal for
the end of programme
1. Press the on/off button to activate the
appliance.
2. If necessary, do the Reset function.
3. Press and hold Program until the pro-
gramme indicator
flash and the programme indicator
comes on with fixed light.
4. Press immediately Program.
•
The programme indicator
comes on with fixed light.
•
The programme indicator
starts to flash.
Degree of soil Programme
Type of load phases
Normal soil Prewash
Crockery and Wash 50 °C
cutlery Rinses
Dry
starts to
Duration
(min)
130 - 140
5. Wait until the programme indicator
goes off. The programme in-
dicator
6. Press Program. The end indicator goes
off. The acoustic signal for the end of
programme is deactivated.
7. Press the on/off button to deactivate the
appliance and to confirm the setting.
How to activate again the acoustic signal
for the end of programme
1. Refer to "How to deactivate the acoustic
signal for the end of programme" and
follow the procedure from step (1) to
step (5). The end indicator is off.
2. Press Program. The end indicator comes
on. The acoustic signal for the end of
programme is activated.
3. Press the on/off button to deactivate the
appliance and to confirm the setting.
Energy Water
(kWh) (l)
1.0 - 1.2 14 - 16
continues to flash.
7