Zgonc New Generation YGL N.G. 159 Betriebsanleitung Seite 35

Disposal
Disposal of the appliance
WARNING!
Risk of fire or environmental damage!
Avoid damage caused by leaking
fuel: drain the tank prior to disposal.
This appliance must not be disposed of with
regular household waste! Dispose of the
appliance in the appropriate manner. For
more information, consult your community
waste disposal service.
Disposal of the packaging
The packaging consists of cardboard
and correspondingly marked
plastics that can be recycled.
– Make these materials available for recycling.
Technical data
Material number
Displacement
Rated output
Tank capacity
Amount of engine oil
Working width
Maximum cutting diameter
Adjustable cutting height
recommended cutting height
Travelling speed
Operating time achieved per tank filling
Air pressure of wheels
Sound power level (L
Noise pressure level (L
guarantee sound power level:
Vibration
Uncertainty
Weight
159 cm³
3.0 kW/3300/min
970 mm
15-90 mm
30-80 mm
3.3 km/h
20-30 PSI
)* 102 dB(A), (K = 3 dB(A))
WA
)* 91 dB(A), (K = 3 dB(A))
PA
108 dB(A).
38.5 m/s²
K = 1,5 m/s²
*) The specified values are emission values and
do not necessarily represent safe workplace
values. Although there is a correlation between
emission and immission levels, this cannot be
used to infer whether additional safety measures
are necessary or not. Factors which affect
the current immission levels at the workplace,
include the type of room, other sources of
noise, e. g. the number of machines operating
and other processes taking place in the vicinity.
Permitted workplace values can differ from
country to country. This information is designed
to help the user to better assess the dangers
and risks.
**) The specified vibration emission value was
measured in accordance with a normed test
procedure and can be used in order to compare
one tool with another. The specified vibration
emission value can also be used for an
introductory evaluation of the exposure. The
vibration emission value may fluctuate from the
specified value during actual use of the power
tool. These fluctuations will depend on the way
in which the power tool is used. Try to keep
vibrations to a minimum. One method of
reducing the vibration load is, for example,
limiting the length of time you work with the
tool. All parts of the operating cycle must be
taken into account for this purpose (for example,
1200 ml
also including times in which the power tool is
550 ml
switched off and times in which it is switched
on, but is running without load).
8 mm
Usable fuels and lubricants
NOTICE!
1-1.5 h
Risk of product damage!
Never use Bio-Ethanol as fuel!
• Unleaded normal petrol, min. 90 Octane
• Engine oil for temperatures below 0 °C:
SAE 10W-30
59 kg
35