Cleaning And Maintenance - Zgonc New Generation YGL N.G. 159 Betriebsanleitung

Repairs
After any repair or maintenance work, check that
all safety-related parts are in place and in proper
working order. All parts which may cause injury
must be kept where they are inaccessible to
children or others.
Important: In accordance with product liability
legislation we are not liable for any damages
caused by improper repairs or the use of spare
parts that are not original spare parts or parts
approved by us. In addition, we are also not liable
for any damages arising from improper repairs.
Such work should be performed by a customer
services workshop or authorized specialist. The
same applies to accessory parts.
Times of use
Lawn mowers are only permitted to be used on
workdays between the hours of 7.00 a.m. and 7.00
p.m. Please comply with statutory regulations,
which may vary from location to location.
Preparing the mower for long-term storage
Caution: Do not empty the petrol tank in
enclosed areas, near fire or when smoking. Petrol
fumes can cause explosions and fire.
1. Empty the petrol tank with a petrol suction
pump.
2. Start the engine and let it run until any
remaining petrol has been used up.
3. Change the oil at the end of every season. To
do so, remove the used engine oil from a warm
engine and refill with fresh oil.
4. Remove the spark plug from the cylinder head.
Fill the cylinder with approx. 20 ml of oil from an
oil can. Slowly pull back the starter handle, which
will bathe the cylinder wall with oil. Screw the
spark plug back in.
5. Clean the cooling fins of the cylinder and the
housing.
6. Be sure to clean the entire machine to protect
the paint.
7. Store the machine in a well-ventilated place.

Cleaning and maintenance

WARNING!
Risk of injury!
Always switch off engine before all cleaning and
maintenance work, allow device to cool down
and remove ignition cable.
Cleaning and maintenance at a
glance
Before each use
What?
Check cable of
the pull-starter for
damage
Check motor oil
level
Check screw
connections are
tight
After each use
What?
Cleaning the device
Every 25 hours of operation
What?
Cleaning the
spark plug
All 100 operating hours or once in year
What?
Cleaning/replacing
the spark plug
Every 200 operating hours or every 12
months
What?
Check the fuel
line
Cleaning the product
NOTICE!
Risk of product damage!
Never clean device with high pressure cleaner.
How?
Visual inspection.
Checking the motor
oil level
Hand-tighten the screw
connections using the
appropriate tool.
How?
Cleaning the product
How?
Cleaning/replacing
the spark plug
How?
Cleaning/replacing
the spark plug ,
Replacement spark
plugs: Technical data
How?
To be carried out by an
approved workshop!
31