Replacing The Fuse; Technical Specifications - EuroLite LED TMH-11 Bedienungsanleitung

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly. The venting slots should be cleaned monthly.
The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX control channels:
DMX512 connection:
Sound-control:
Flash-rate:
Number of LEDs:
LED type:
Maximum PAN-movement:
Maximum TILT-movement:
Length of base:
Width of yoke:
Height (head horizontal):
Weight (net):
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Accessory:
EUROLITE TH-50 Theatre hook, silver
Safety bond 4x1000mm up to 15kg, silver
EUROLITE DMX operator 192 channels
Please note: Every information is subject to change without prior notice. 01.08.2011 ©
CAUTION!
230 V AC, 50 Hz ~
115 W
12
3-pin XLR
via built-in microphone
18 Hz
12
9 W TCL
540°
270°
280 mm
260 mm
330 mm
6 kg
: 45° C
a
(steady state): 60° C
B
0.5 m
0.1 m
F 2 A, 250 V
No. 58000650
No. 58010320
No. 70064520
28/28 00058797.DOC, Version 1.1