Rear Spacers - AEG S72300DSW0 Benutzerinformation

Climate class
SN
N
ST
T

Rear spacers

In the bag with the documentation, there are two spacers which must be fitted as shown in
the figure.
1. Fit the spacers into the holes. Make sure
that the arrow (A) is positioned as shown
in the picture.
2. Turn counter-clockwise the spacers
through 45° until they lock into place.
Levelling
When placing the appliance ensure that it stands level. This can be achieved by two adjust-
able feet at the bottom in front.
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
Ambient temperature
45˚
35
Installation
A