AEG S72300DSW0 Benutzerinformation Seite 39

8. Screw the pin back on the other side.
9. Fit the doors into the pins and install
the doors. Install the hinge.
10. On the opposite site, install the hole
covers.
11. Tighten the hinge. Make sure that the
doors are aligned.
12. Remove and install the handle
opposite side.
13. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
10) If foreseen
10)
on the
Installation
2
1
39
3