Included Items; Technical Information - Parkside PFBS 9.6 A1 Bedienungs- Und Sicherheitshinweise

Battery pack
3 a
Metal stirrup hanger
4
Wrist strap
4 a
ON / OFF switch
5
Clamping nut
6
Spigot nut
7
Spindle lock
8
Battery charger (see Fig. A):
Charging cradle
9
Mains adapter
10
LED
11
Accessories (see Fig. B):
6 hSS drills
12
2 Mandrels for mounting tools
13
3 Polishing wheels
14
4 Grinding wheels
15
1 Metal brush
16
16 Cutting wheels
17
5 Collets
18
2 Plastic brushes
19
3 Engraving bits
20
2 Milling bits
21
5 Grinding bits
22
Combination tool
23

Included items

Q
1 Cordless multi-grinder with rechargeable
battery pack
1 Charging cradle
1 Mains adapter
1 Accessory kit (50-piece)
1 Operating instructions

Technical information

Q
Model PFBS 9.6 A1:
Rated voltage:
Rated speed:
Max. disc ø:
Drill chuck clamping range: max. ø 3.2 mm
9.6 V
n 5000–25000 min
-1
25 mm
Rechargeable battery pack PFBS 9.6 A1-1:
Rated voltage:
Capacity:
Battery charger PFBS 9.6 A1-2:
Primary:
Rated voltage:
Rated input:
Secondary:
Rated voltage:
Charging current:
Charging duration:
Protection class:
Noise and vibration data:
Measured values for noise are determined in accor-
dance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level:
Sound power level:
Uncertainty K:
Wear ear protection!
Evaluated acceleration, typical:
hand / arm vibration: 0.759 m / s
Uncertainty K = 1.5 m / s
The vibration level given in these
instructions has been measured in accordance with
a standardised measurement procedure specified in
EN 60745 and can be used to compare devices.
Different uses of the device give rise to different
vibration levels and in many cases they may exceed
the values given in these instructions. It is easy to
underestimate the vibration load if the electrical pow-
er tool is used regularly in particular circumstances.
Note: If you wish to make an accurate assessment
of the vibration loads experienced during a particular
period of working, you should also take into account
the intervening periods of time when the device is
switched off or is running but is not actually in use.
This can result in a much lower vibration load over
the whole of the period of working.
Introduction
9.6 V
1000 mAh NiMh
230–240 V∼, 50 hz
13 W
12 V
400 mA
approx. 3 hours
II /
70.4 dB(A)
81.4 dB(A)
3 dB
2
2
GB 49