Introduction; Proper Use; Features And Equipment; Included Items - Parkside PBS 900 A1 Τ Bedienungs- Und Sicherheitshinweise

Introduction

The following pictograms are used in these operating instructions / on the device:
n
0
V ~
Belt sander PBS 900 A1
Introduction
Q
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical power
tools correctly. To help you do this please read the
accompanying operating instructions. Keep these
instructions in a safe place. If you pass the device on
to anyone else, please ensure that you also pass on
all the documentation.

Proper use

Q
The belt sander is designed for dry sanding of large
surfaces of wood, plastic, metal, plaster and painted
surfaces. The device may only be used for dry sand-
ing. Always use a sanding belt and grade of grit
suitable for the particular surface you are sanding.
The speed selected should also be appropriate for
the material. The device is not intended for commer-
cial use. Any other use or modification to the device
shall be considered as improper use and could give
rise to considerable dangers. The manufacturer will
not accept liability for loss or damage arising from
improper use.
6 GB/IE/CY
Downloaded from www.Manualslib.com
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
Rated idle running speed
Voltage
manuals search engine
W
Watts (Effective power)
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children away from electrical
power tools!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Dispose packaging and appliance in
an environmentally-friendly way!

Features and equipment

Q
Belt speed adjuster wheel
1
Locking knob
2
ON / OFF switch
3
Toothed belt cover
4
Dust extraction spout
5
Belt adjuster screw
6
Auxiliary handle
7
Ventilation slots
8
Tensioning lever
9
Dust collection box
10
Extraction adapter
11
Fixed mounting kit:
Mounting frame
12
Clamp plates 2 x
13
Screw clamps 2 x
14
Spacer plates 2 x
15
Screw
16

Included items

Q
Check that all the items and accessories
are present immediately after unpacking
the device:
1 Belt sander PBS 900 A1
1 Sanding belt