Omnitronic XDP-1400 Bedienungsanleitung Seite 24

16 Button CUE
• When pressing the button in pause mode and during
replay the unit stops and returns to the starting point of
the title (cue point) and is in pause mode (LED lights
blue).
• When keeping the button pressed in pause mode, the
title is momentarily replayed. As soon as you release
the button the unit instantly returns to the cue point.
• Every time a new cue point is set, the LED flashes
repeatedly.
17 Button
Switches between play and pause. During playback the
blue LED lights, in pause mode the blue LED flashes.
18 Control FOLDER/TRACK SEARCH
• Turn the control to the left or right to select titles. Title
number and title name are indicated in the LCD.
• Short actuation of the control: switch over to folder
selection mode (indication "FOLDER"). Now you can
browse the folders by turning the control. Press the
control to select the desired folder. Afterwards, the unit
switches back to the title selection mode (indication
"FOLDER" off).
23 AC connection
Plug in the supplied power cable here.
19 Buttons IN, OUT, RELOOP
Buttons to memorize and play a seamless continuous
loop.
• IN: sets the starting point of a loop (LED lights blue)
• OUT: defines the end point of a continuous loop which
is instantly started (LEDs IN and OUT are flashing). The
loop will continue to play until the button OUT is
pressed once again.
• RELOOP: starts the loop once again
20 Button SINGLE
This button determines the operating mode.
• Basic setting: continuous play of all titles of the CD
• First actuation: single title play (indication "SINGLE");
after playing a title, the unit is set to pause at the start of
the next title
21 Button REPEAT
For selecting the repeat functions.
• First actuation of the button (indication "REPEAT 1"):
continuous repeat of the title selected
• Second actuation of the button (indication "REPEAT
ALL"): continuous repeat of all titles
22
Button PGM
For programming an individual title sequence.
24 Analog line output
Analog audio output (RCA left/right) with line level for
connecting an amplifier, a mixer or other units with line
level inputs.
24/32 00047148.DOC, Version 1.0