Fast Forward Or Reverse; Return To The Starting Point Of The Title Or To A Defined Spot (Cueing); Pitch Adjustment; Matching The Beat Between Two Titles (Pitch Bend) - Omnitronic XDP-1400 Bedienungsanleitung

6.9 Fast forward or reverse

1 For fast forward or reverse on the player, first activate the search function for the rotary wheel by shortly
pressing the button JOGMODE. The button's control LED lights blue. Then turn the rotary wheel in the
corresponding direction within the current title. The fast forward/reverse speed depends on the turning
speed of the wheel. In pause or cue mode the current spot is constantly repeated after fast forward or
reverse until playback is started with the button
2 For fast forward or reverse you may also use the buttons
forward, keep the button

6.10 Return to the starting point of the title or to a defined spot (cueing)

To quickly jump back to the starting point of the title or to a defined spot, a starting point (cue point) can be
stored temporarily for the button CUE. The cue point will be overwritten with the starting point of the next title
when the next title is reached or when the next title is selected.
1 To jump to the starting point of a title, press the button CUE in pause or play mode. The unit stops and
returns to the starting point of the title (cue point) and is in cue mode (the LED of the button CUE lights
red).
2 To set the cue point at a different spot of the title, the rotary wheel can be used for precisely selecting the
spot to one frame (1/75 second). The function fast forward/reverse must be deactivated. The current
spot is constantly repeated. As soon as playback is started with the button
memorized (LED flashes repeatedly).
3 After jumping to the cue point, playback can be started with the button
the button CUE pressed and momentarily play the title. As soon as you release the button the unit
instantly returns to the cue point.

6.11 Pitch adjustment

The playback speed can be adjusted variably up to ±16 % with the slide control PITCH.
1 First select the adjusting range with the button PITCH. Each short actuation of the button switches the
unit between 4 %, 8 %, and 16 %. The percentage is shortly inserted on the display.
2 Keep the button PITCH (blue LED lights) pressed until the blue LED lights to activate the slide control
PITCH. The display indicates "PITCH".
3 Then slide up the control PITCH to decrease the pitch and slide it down to increase the pitch. The
display shows the percentage deviation form the standard speed.

6.12 Matching the beat between two titles (Pitch Bend)

With the function pitch bend, the beat of the current title can be matched (synchronized) to the beat of a
music piece playing on another player. Thus the rhythm will not be interrupted while crossfading from one
title to another. Unlike the adjustment with the slide control PITCH this function will temporarily increase or
decrease a title's speed during playback.
1 First use the slide control PITCH to adjust the same number of beats (BPM) for both music pieces.
2 Then synchronize the beats of the two music pieces by turning the rotary wheel. The function fast
forward/reverse must be deactivated. The change of speed depends on the turning speed of the wheel:
Rotating the wheel in a clockwise direction will increase your title speed and rotating the wheel in a
counterclockwise direction will decrease your title speed. As soon as you stop turning the wheel the
speed will automatically return to its previously set speed.
3 Alternatively to the rotary wheel you can also use the buttons PITCH BEND for matching the beat. As
long as the button + or - is kept pressed, the title is played 16 % faster or slower. As soon as you release
the buttons PITCH BEND the BPM will automatically return to normal.
.
pressed, for fast reverse keep the button
30/32
and on the remote control. For fast
pressed.
a new cue point is
. Alternatively, you can keep
00047148.DOC, Version 1.0