Filter Cleaning; Cleaning The Spray Arms - KKT KOLBE GS6013ED Benutzerhandbuch

Maintenance and cleaning

6.1 Filter cleaning

It is recommended to clean the entire fi lter unit
always thoroughly and regularly.
1. Turn the coarse fi lter counterclockwise and
pull it in the upward direction. Rinse this part
under running water and remove all food
residues that have attached themselves to the
fi lter.
2. Pull the main fi lter out and rinse it off under
running water to remove all food residues that
have been attached to the fi lter.
3. Remove the fi ne fi lter back in.
4. Remove the main and coarse fi lter back into
the space provided in the base of the dish-
washer. The coarse fi lter must be turned in
a clockwise direction, so that it locks in the
correct position.
If dish breaks in the device, make sure that all fragments
!
are removed before the machine is started again, so as not
to damage the unit.
Never turn on the wash cycle when the fi lters are
not installed!

6.2 Cleaning the spray arms

The spray arms should be cleaned regularly to avoid clogging
of the nozzles in the spray arms and the bearing with hard
water deposits.
• To remove the spray arm, fi rst unscrew the nut and remove
the washer, which is placed on the upper part of the spray
arm.
25