KKT KOLBE GS6013ED Benutzerhandbuch Seite 64

Troubleshooting
E3: The expiration period is longer or extended.
• The drain pipe can be located too high or wrong. Read the installati-
on instructions and make sure that the installation is properly done.
• Check that the drain hose is not knotted or kinked.
• Make sure that the drain hose is not longer than the length of the
original hose.
E3: The unit found presence of water in the case of the
dishwasher.
• Check that the drain hose is not knotted or kinked.
• Check if there are congested locations in the drain hose or if maybe
the drain system is clogged to which the washer is connected.
• The drain pipe can be located too high or wrong. Read the installati-
on instructions and make sure that it is properly installed.
• After you correct the error that led to the display of the error codes,
connect the power back to the power supply.
• Switch the dishwasher on with the ON / OFF button and wait 5 se-
conds before you set your own program using the program selection
buttons.
Once you were able to fix the error that led to the display of the
error codes, connect the power back to the power supply. Switch
it using the ON / OFF button again and wait 5 seconds.
If repair costs incurred during the warranty period due to im-
!
proper operation of the unit, the customer must pay these costs
themselves.
28